guideline of installation
mira en tu interior

The installation video can't be loaded because you don't have installed the needed version of Flash Player plugin.

Click here to get the last version.

It’s so easy!

This is the detailed instructions about how to install the vinyl. Follow it step by step. Do not apply the vinyl until you are told to do so.

00

Make sure that the surface where you want to put the vinyl is the correct one and is smooth and does not have any humidities. You have to put it in a smooth and clean surface. We suggest you to use a dry rag and no using any other product, if not, the adhesive part of the vinyl can be prejudiced. Cut he sticky tape that unites the two leafs (this union prevents them separating during the transport). They must be liberated for the installation.

consejo 01 consejo 01

01

Put the opaque side of the vinyl in contact with the wall or the surface you want to put the vinyl on. Put the pieces on the desired place and stick it with some adhesive tape. If you receive your vinyl in more than one piece start by installing the biggest one.

consejo 02 consejo 02

02

Put the paper in the wall by using adhesive tape on the top of the vinyl from side to side. Pull the piece by rolling in itself if it’s big sized.

consejo 03 consejo 03

03

Pull carefully the adhesive paper and let the roll fall.

consejo 04 consejo 04

04

Before removing the transfer paper, press the vinyl’s shape. Pay special attention on the shapes.

consejo 05 consejo 05

05

Remove now the transfer layer without pulling it in a perpendicular direction. We suggest you to pull slowly in the wall’s direction. If it’s a big piece you can cut it in the middle in order to divide the paper surface and pull more easily.

consejo 06 consejo 06

06

If your design is divided in several pieces to make your installation easier, follow the process by putting the second piece on the wall by following the previous steps. If both pieces need to be in touch, try to put carefully the second piece on the top of the first one by mounting it 3mm in the first intersectioned area.

consejo 07 consejo 07

07

If you have recently painted your wall, be careful with the adhesive tape you can use to make the installation easier. We recommend you soft adhesive tape.

08

After sticking it on the wall, don’t remove it again.

Notes

1. Depending on the size of your vinyl, you can receive it divided in different parts. This is to make your installation easier. If this is your case, remember to install the bigger parts first. We will send you some pictures as a guide.

2. If you have to install a multi-part vinyl, these parts should fit perfectly the others. Take some measures in your wall before installing the vinyl for achieving a better result. Creating some marks with a pencil can help you to align and distribute the different vinyl pieces.

3. For vinyls higher than your wall, cut the usefulness area with a cutter. Make sure that your vinyl is bigger than the size of our wall in order to make it fit with your wall by cutting the vinyl that goes out of the wall limits.

4. If you find pulling the transfer layer difficult, apply some water with a moisturizer. Not recommendable for painted walls.

5. If you want to install a big piece of vinyl in glass or in a smoother surface, we recommend you to moisturize the surface before. This is only for biggest vinyls. We don’t recommend that for other surfaces.

6. If some bubble appears on the installed vinyl you can use a needle to make a hole and your finger to put some pressure on it.

7. If you have recently painted your wall be careful with the adhesive tape you can use to make the installation easier. We recommend you soft adhesive tape.

8. Once the vinyl is installed, do not remove it from the wall.